Introduction:
Also known as Fiberglass Pipe Fittings. FRP Pipe Fittings include FRP flange, FRP elbow, FRP tee, FRP cross, FRP reducer (different diameter in ends),FRP filter and other FRP pipe fittings or corresponding FRP composite pipe fittings of FRP composite pipe.
Features:
-Lightweight and high strength: The material density of FRP products is usually 1.8-2.1g/cucm, which is about 1/4~1/5 of steel, and the circumferential tensile strength is ≥300MPa. The specific strength is higher than that of steel.
-Chemical resistance, long service life: FRP has excellent chemical resistance. In corrosive media, FRP exhibits superiority to other materials. Different matrix materials can resist a variety of acids, bases, salts and organic solvents.
-Highly designable: FRP can adjust the physical and chemical properties of the product by changing the combination of raw materials and the thickness, structure and molding process of the inner liner layer, structural layer and external anti-aging layer to meet the needs of different media and working conditions, to achieve the optimization of all aspects.
| Elbow parameter table | |||||||
| D | R | 0.6MPa | 1.0MPa | 1.6MPa | |||
| TH | L | TH | L | TH | L | ||
| 50 | 75 | 6 | 75 | 7 | 75 | 8 | 75 |
| 65 | 97.5 | 6 | 97.5 | 7 | 97.5 | 8 | 97.5 |
| 80 | 120 | 6 | 120 | 7 | 120 | 8 | 120 |
| 100 | 150 | 6 | 150 | 7 | 150 | 8 | 150 |
| 125 | 187.5 | 7 | 187.5 | 8 | 187.5 | 10 | 187.5 |
| 150 | 225 | 7 | 225 | 8 | 225 | 10 | 225 |
| 200 | 300 | 7 | 300 | 9 | 300 | 12 | 300 |
| 250 | 375 | 8 | 375 | 11 | 375 | 13 | 375 |
| 300 | 450 | 9 | 450 | 12.5 | 450 | 14.5 | 450 |
| 350 | 525 | 10.5 | 525 | 13 | 525 | 16 | 525 |
| 400 | 400 | 12 | 450 | 14 | 450 | 17.5 | 450 |
| 450 | 450 | 13 | 550 | 15 | 550 | 18.5 | 550 |
| 500 | 500 | 14 | 600 | 16.5 | 600 | 19 | 600 |
| 600 | 600 | 15 | 750 | 17 | 750 | 20.5 | 750 |
| 700 | 700 | 16.5 | 850 | 18.5 | 850 | 21 | 850 |
| 800 | 800 | 17.5 | 1000 | 19 | 1000 | 22 | 1000 |
| 900 | 900 | 18.5 | 1150 | 21 | 1150 | 23.5 | 1150 |
| 1000 | 1000 | 20 | 1250 | 22.5 | 1250 | 25 | 1250 |
| Flange parameter table | ||||||
| D | 0.6MPa | 1.0MPa | 1.6MPa | |||
| S | L | S | L | S | L | |
| 50 | 16 | 150 | 18 | 150 | 20 | 150 |
| 65 | 16 | 150 | 20 | 150 | 20 | 150 |
| 80 | 18 | 150 | 20 | 150 | 25 | 150 |
| 100 | 18 | 150 | 25 | 150 | 25 | 150 |
| 125 | 20 | 150 | 25 | 150 | 30 | 150 |
| 150 | 20 | 200 | 25 | 200 | 30 | 200 |
| 200 | 25 | 200 | 30 | 200 | 35 | 200 |
| 250 | 30 | 250 | 30 | 250 | 40 | 250 |
| 300 | 30 | 250 | 35 | 250 | 40 | 250 |
| 350 | 35 | 300 | 35 | 300 | 45 | 300 |
| 400 | 35 | 330 | 40 | 330 | 50 | 330 |
| 450 | 35 | 350 | 40 | 350 | 55 | 350 |
| 500 | 40 | 400 | 45 | 400 | 60 | 400 |
| 600 | 40 | 450 | 50 | 450 | 65 | 450 |